Complete office New Ross with cabinet and drawer

Desk from the New Rossana line

Table top: scratch-resistant melamine particleboard, thickness mm. 30, plain gray and grained birch finishes.

All the table tops have 30/10 ABS plastic beveled edges on all sides. 
GP metal structure: when the metal structure is assembled, the leg is not at the center of the table top, but slightly towards the edge. 
The anchoring system of the various vertical components is designed so that, using the same components, it is possible to mount either a left or right off-centered leg. A system of telescopic beams completes the structure.
The metal structure is epoxy powder coated in the aluminum finish.
Modularity: The desks can be assembled together at 90° with the help of curved junctions 80x80, 80x60, 60x60 or with lateral returns whose beam is hooked to the desk beam.
Cable channeling: the metal structure allows both horizontal channeling - thanks to the underframe beam - and vertical channeling - thanks to the folding legs that can be wired with matching casing.
Accessories available on request: cable hole and grommet, metal modesty panel, screen that can be attached to the table top.

 Storage units from the New Rossana collection 

The storage cabinets of the New Rossana collection are available in 45/90 cm widths and in 83/121/201.5 cm heights (plus the height of the optional 3 cm top).

The structure of the cabinet is in scratch-resistant melamine particleboard, available in aluminum or white for the 42.6 cm depth and in aluminum for the 33 cm depth.
The sides, base and top part are 18 mm thick, the shelves are 25 mm thick, the back panel is 10 mm thick.
The door handles are available in gray RAL 9006.
The height of the cabinet is based on the height of the DOX binder: the low cabinets H 83 are designed to contain two rows of DOX, the medium ones H 121 can contain 3 rows.
The 42.6 cm depth of the open cabinet was designed to store sheets and printouts in UNI A3 format (402X297 mm) along the longest side as well. A 33 cm depth is also available.

Metal drawer unit 

Metal drawer unit available in 3 colors: Aluminum ral 9006 with embossed finish, Anthracite ral 7016 with embossed finish, White.

Supporting structure made of 15/10 thick bent metal sheet.
The side panels and the back are in 10/10 thick metal sheet.
The drawers are made entirely of metal and can be equipped with dividers.
 Metal drawer slides.
The technical equipment also features: end-of-stroke, anti-tipping and central locking devices.